HomeWho Is Using The Clear TekDemo ProgramShop OnlineNIJ Level IIIAContact UsClear Tek Training

NIJ LEVEL IIIA Certified

44 Magnum Lead SWC
44magphoto.JPG
5 Shots 5 meters No Penetration

Dimentions 18.5 X 12.5
Dimentions_jpg_w300h389.jpg

 




 

INTERNAL BALLISTIC TESTING WITH NO PENETRATION

9mm                 Semi Jacketed Hollow Point          125 gr.

9MM                  Hydra Shock                                   147 gr.

38 S&W             Jacketed Hollow Point                   158 gr .  

38 Special         Carbon Hollow Point                      110 gr.

357 Magnum     Jacketed Soft Point                       158 gr.

45 Auto             Full Metal Jacket                            230 gr.

45 Black Talon   Jacketed Hollow Point                  230 gr.

44 Magnum       Lead Semi-Wadcutter                    240 gr.

Five rounds per shield at 5 meters.

SPECIFICATION

3-ply, clear, extruded Lexan* polycarbonate and acrylic sheet of the following construction:

•3/16” Lexan sheet with a MARGARD sheet surface •
Polyurethane interlayer
•½” Acrylic sheet
•Polyurethane interlayer
•3/16” Lexan sheet with a Margard sheet surface
Material shall have a flexural strength not less than 13,500 psi (ASTM D790); 86% light transmission (ASTM D1003). Material shall be a total thickness of .86” +/- 8%. Material shall have a Margard surface for abrasion resistance and service life performance, and must conform to ICBO, BOCA, and SBCCI Model Building Codes as an Approved Light-Transmitting Plastic with a C2 (CC-2) flammability performance level.

glass.JPG

**As tested by the German State Institute
*Trademark of SABIC Innovative Plastics
IP BV Lexgard is a registered trademark of LEXGARD Laminates LLC
Santoprene is a registered trademark of Exxon Mobile Corporation